Please set up your phone first. You just need to connect your phone to power, internet and handset. If you are having a problem setting up your phone, you may refer to the Yealink support website.

Once you set up your device, you choose either: A. LCD Configuration or B. Web Configuration to configure your phone with Hoiio SIP. 


A. LCD Configuration


1. Click the “Menu” button
  

     


2. Choose “Settings” > “Advanced”
    

      >  

3. Enter your admin password, the default password is “admin”.
   

      


4. Choose which line to configure among line 1 and 2.

5. Enter the following information:

  • Label: (can be anything)
  • Display name: (anything you want, can be your incoming number)
  • Register name:  <sip username>*
  • Username:  <sip username> *
  • Password:  <sip password> *
  • Sip server:  sip1.b3networks.com
  • Outbound:  enable (if you want to make outgoing call)
  • Outbound host:  sip1.b3networks.com
  • STUN:  you can choose to enable it
  • Auto answer:  disable

  * Use your username and password provided by service provider.

6.      Press “OK” and wait a few seconds for your IP phone to be “Registered”. 

**To make outgoing calls, follow this standard: <country code> + <area code> + <destination>. For example, if you are calling a Singapore number 12345678, key in: 6512345678 and call.



B. Web Configuration


1.   On your device, click on Menu and go to "1. Status" to check the IP address.
        


2. Open a web browser and type your IP address in the address bar.

      


3. Type in the Username and Password. The default is "admin" for both Username and Password.

     


4.      Once you , click on "Account" on the top.
      



5.    Enter the following information:

  • Line Active: Enabled
  • Label: Anything you like to appear on the LCD of your phone
  • Registered Name: SIP account we provide (e.g. sip1234567) 
  • User Name: SIP account we provide (same as Register Name) 
  • Password: SIP password we provide
  • Server Host: sip1.b3networks.com


6. Click on "Confirm" and your phone will be configured.


**To make outgoing calls, follow this standard: <country code> + <area code> + <destination>. For example, if you are calling a Singapore number 1234 5678, key in: 65 1234 5678 and call.