B3 Networks

As the name implies, Edge is typically deployed at the edge of an enterprise network as the demarcation point. The Edge was born for special purpose that pr...

In order to connect B3's system with a vendor's system, follow the steps below: Step 1: Get some basic settings ready before creating a trunk: ...

Codecs are standards that encode and decode sound into data streams for transmission in the internet environment. Codecs convert audio voice signals into a ...

The purpose of capacity limiting is to prevent trunk/peer/interconnect sending too many call requests than given configuration. There are 2 kinds of limitin...

Introduction The translation rule replaces a sub string of the input number if the number matches the match pattern. The regex engine is used to check f...

Introduction The variances among SIP networks, such as incompatible interconnection, can disrupt SIP operations. In order to resolve these problems, Edge S...

Introduction The Edge provides a routing engine that selects an outgoing interconnect (outbound trunk) for a call based on a set of user-defined routing cr...

Introduction Interconnection Trunk is the trunk group used to connect one or mutiple carriers’ networks with B3networks's network for the purposes o...

Introduction Netcap is a tool that helps you to capture live network traffic travelling over your network for monitoring and logging. It provides you PC...

Introduction Backup is a tool for Edge operators to export all current configuration of a cluster (.json files) in order to backup in case someone mista...